ParaLink-Mesh

Connect up to 10 devices across your location. View their activity and control supported features from one Android screen.

Bring your Spotted: Ghosts equipment together with ParaLink-Mesh, the FREE Android app for live viewing, remote control and session recording.

From radar scans and environmental graphs to word responses and sensor activity—keep your investigation in view. 👻

📡 Spread your devices out. Bring your investigation together.

Turn your location’s Wi-Fi network into a connected investigation setup.

Connect your Android phone or tablet and up to 10 compatible devices to the same home network or Wi-Fi router. Place equipment in different rooms, corridors or floors, then follow their activity together through ParaLink-Mesh.

Monitor an ENVIRON upstairs, watch a SpecTracer in the hallway and follow a Spirit Music Box in another room—all from one Android screen. Use supported remote controls without repeatedly walking between devices.

Your equipment can cover different areas while you stay focused on the whole investigation. 👻

🏠 Use the location’s Wi-Fi coverage

Your devices don’t all need to sit close to your phone. When connected through a router, they communicate over the local network, allowing you to spread them throughout its Wi-Fi coverage.

A well-covered network can support monitoring across an entire location. Actual coverage depends on the router, walls, floors and surrounding conditions. Wi-Fi access points or compatible extenders can help reach more areas, provided all devices remain on a network that allows them to communicate.

No internet connection is required for local viewing and control—the local Wi-Fi network provides the connection.

📱 No router? Use your phone’s hotspot.

For locations without a suitable Wi-Fi network, connect your equipment through your Android phone’s hotspot instead. Position devices within hotspot coverage and monitor them through the same app.

🔗 Up to 10 devices. One connected setup.

Connect any combination of supported devices – whether you want several different tools working together or multiple units of the same model.

View activity from different parts of your location.
Follow several device displays together.
Compare readings, responses and detections as your session unfolds.
Watch for changes happening around the same time.
Use supported controls without repeatedly returning to each device.

Keep your equipment where it matters—and stay focused on the investigation.

CLICK HERE TO VIEW ALL COMPATIBLE DEVICES

📱 Live viewing & remote control

ParaLink-Mesh brings connected device displays and supported controls to your Android phone or tablet.

Depending on the device, you can:

View live displays, including radar scans, sensor readings, graphs and responses.
Interact with supported on-screen controls.
Start or stop scanning and change supported scan modes.
Start or pause SD card logging on compatible devices.
Monitor multiple devices together from one location.

Available features and controls depend on the connected device and its installed firmware.

🧩 Supports all seven Spotted: Ghosts devices

Spirit Talker® Lite Watch
Follow its live display and responses alongside your other connected equipment.

Spirit Music Box
Monitor sensor readings, graphs and activation information, with supported remote controls.

Spirit Bell
View its display, sensor activity and trigger information.

SpecTracer™
Follow live LiDAR scans and access supported scanning controls.

EchoTracer™
Watch ultrasonic scans and detection activity remotely.

WaveTracer™
Follow live radar targets and movement, with supported remote controls.

ENVIRON™
Monitor environmental readings and graphs, and start or pause recording remotely.

Seven supported device types. Up to 10 connected devices in total.

CLICK HERE TO VIEW ALL COMPATIBLE DEVICES

🎥 Capture your session

Use ParaLink-Mesh’s built-in screen-recording feature to capture the connected displays for later review, investigation videos or sharing with your team.

You can also use your Android phone’s own screen recorder.

Where supported, individual devices can keep their own recordings on their SD cards. These remain separate from your phone’s screen recording.

📶 Two ways to connect

Through a home network or Wi-Fi router

Ideal for spreading equipment around a location.

Connect your Android phone or tablet and compatible devices to the same local network, open ParaLink-Mesh and allow the devices to connect.

Position equipment throughout the network’s coverage, then view activity and use supported controls from your phone or tablet.

Through your phone’s hotspot

No suitable router at your investigation location? Use your Android phone’s hotspot instead.

Connect your devices to the hotspot, open ParaLink-Mesh and position your equipment within its coverage.

Both options support local viewing and control without an internet connection. Keep ParaLink-Mesh open during use and ensure your network allows connected devices to communicate.

⚙️ Get connected

Update your devices
Install the latest compatible firmware using each device’s instructions.
Download the free Android app
Download and install the ParaLink-Mesh app from the Google Play Store by clicking HERE.
Configure your connection
Set each device to use your chosen Wi-Fi network or phone hotspot.
Open ParaLink-Mesh
Power on your devices and allow them to initialise and connect.
Position your equipment and investigate
Follow live activity, use supported remote controls and record your session.

Network details can be configured through the wifisettings.txt file on the device’s SD card. Please see the device instructions HERE

⬇️ Download ParaLink-Mesh for Android ⬇️

Free to download. Built to bring your Spotted: Ghosts devices together.

Version 2.4 – Now available in the Google Play Store. All updates will now be done automatically through the Play Store

ParaLink-Mesh continues to develop, with new features and compatibility improvements delivered through updates.

👻 More rooms. More devices. One connected investigation.

Initial Field Test (July 2025)